Shanghai ZLAN Information Technology Co., Ltd Tel: +86-17321037177 http://www.zlmcu.com
36
Figure 26 TCP device pairing parameter configuration
Figure 27 successful TCP device pairing check
In the case of UDP pair-connection, the configuration parameters are shown in
figure 28, and the parameters corresponding to the arrows must be one-to-one. As
long as the parameters of UDP pair are configured correctly and the connection
status is not checked, the data sent will be automatically sent to the specified
device.
FIG. 28 configuration of UDP device pairing parameters
To Next Page
Loading...
Need help?
General
