13
Rack Adjustment Procedure
ADJUSTING THE UPPER RACK
The height of the upper rack can be adjusted to accommodate loading taller dishes in
either rack.
1. Lift the rack to move it to the upper position.
2. Press the handle to move it to the lower position.
LOADING THE UPPER RACK
The upper rack is designed for cups, glasses, small plates, bowls, and plastic items marked
dishwasher-safe. For best results, place the items with the soiled surface facing down or
toward the center. Tilt them slightly for better drainage.
NOTE: Make sure the loaded dishes do not interfere with the rotation of the middle spray
arm, which is located just below the upper rack. You can check this by rotating the middle
spray arm by hand.
OPERATION
To Next Page
