18
Filling the Rinse Aid Dispenser
USING RINSE AID
FILLING THE RINSE AID DISPENSER
Your dishwasher is designed to use a liquid rinse aid. The use of rinse aid greatly improves
drying performance after the final rinse. Do not use a solid or bar-type rinse aid. Under
normal conditions, the rinse aid will last approximately one month. Try to keep the
dispenser full, but do not over fill it.
1. Turn rinse aid dispenser cap 1/4 turn counterclockwise and lift it out.
2. Add rinse aid until liquid touches the indicated fill level. Do not overfill since this
can cause over sudsing. Wipe up any spills with a damp cloth. The dispenser holds
enough for 35 to 140 washes, depending on the dial setting.
3. Replace the cap and turn it 1/4 turn clockwise.
OPERATION
To Next Page
