25
Troubleshooting
Refer to this table to correct minor issues before calling for service.
CODE MEANING POSSIBLE CAUSE
E1
Slow fill time/fill time has exceeded
time alloted
• Faucet is not opened
• Water intake is restricted
• Water pressure is too low
E4 Overflow A leak in the dishwasher
Ed Communication exception or issue
The display board can’t receive or the
main board can’t send a signal for
over 20 seconds.
CAUTION
• If a water overflow occurs, turn off the main water supply before calling for service.
• If there is water in the base pan because of an overfill or small leak, the water should
be removed before restarting the dishwasher.
TROUBLESHOOTING
To Next Page
