30
TROUBLESHOOTING
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
There are black
or gray marks
on the dishes
Aluminum utensils have rubbed
against the dishes.
Make sure that the water
inlet temperature is not less
than 120 °F (49 °C).
The interior of the
tub is stained
Coffee or tea stains.
Use a spot cleaner to
remove the stains.
Reddish stain.
Some tomato-based
products may cause this.
Use of the rinse only
cycle right after loading
will help this.
Noises
Detergent cup
opening/drain pump.
This is normal.
A hard object has entered the
wash module. When the object is
ground up the noise will stop.
If the noise continues after
the cycle is complete, call
for service.
The dishwasher
won’t fill (the
dishwasher will beep)
The water valve is turned off. Turn on the water valve.
The door may not be
closed completely.
Make sure that the door is
closed and latched.
To Next Page
