13
BEFORE INSTALLATION
Cabinet Requirements
ADDITIONAL SPECIFICATION NOTES FOR THE INSTALLER
• The diagram on page 12 for the MWO-30 model is not 100% to scale and does not
include additional measurements that are unique to the 30" model and are necessary for
built-in installation.
• Unlike the MWO-24, which has a simple rectangular chassis behind the door panel that
slides into a cabinet cut-out, the MWO-30 chassis includes multiple recesses that impact
cabinet cut-out specifications, in particular with the height and width specifications.
• Below are the recommended general cabinet cut-out dimensions based on accurate
chassis measurements for both models (see pages 14–16 for visual examples of
these recommended cut-out sizes):
CUTOUT SPECIFICATIONS
MWO24
• 22 3/8" W x 23 1/4" D x 17 3/4" H
• 568 mm W x 591 mm D x 451 mm H
MWO30
• 28" W x 23 1/8" D x 19" H
• 711 mm W x 587 mm D x 483 mm H
To Next Page
Loading...
