EasyManua.ls Logo

Zline MWO Series - Electrical Requirements; Electric Installation; Outlet Area

Zline MWO Series
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
ELECTRICAL REQUIREMENTS
A 3-prong grounded outlet
120VAC, 60Hz, NEMA 5-20 plug
20-amp electrical supply with a fuse or a circuit breaker
ELECTRIC INSTALLATION
This product must be connected to a supply circuit of the proper voltage and frequency.
Wire size must conform to the requirements of the National Electrical Code or the
prevailing local code for this rating.
The power supply cord and plug should be brought to a separate 20-amp branch circuit,
single-grounded outlet. The outlet box should be located inside the cabinet above
the appliance.
The outlet box and supply circuit should be installed by a qualified electrician and
conform to the National Electrical Code or the prevailing local code.
The voltage used must be the same as specified on this microwave oven. Using a higher
voltage is dangerous and may result in a fire or oven damage. Using a lower voltage
will cause slow cooking.
The manufacturer is not responsible for any damages resulting from the use of the oven
with any voltage other than specified.
OUTLET AREA
The electrical outlet must be located anywhere within the shaded area; the minimal distance
between the appliance and the wall is 1 3/4" (45 mm).
MWO-24
MWO-30
NEMA 5-20
BEFORE INSTALLATION
Electrical Connection

Related product manuals