Zline MWO Series - Mount to Cabinet

16
Cabinet Requirements
INSTALLATION
BUILTIN
MWO-24
MWO-30
• Carefully push the microwave into the cabinetry, making sure that it is in the center.
• Do not kink the electrical cable.
• Open the door and fasten the microwave with the screws that were supplied.
WARNING
WARNING: The gap between the worktop and the appliance must
not be closed by additional battens.
MOUNT TO CABINET
NOTE: The appliance is heavy. It is advisable to install it with a second person.
NOTICE: Before installing the appliance, be sure to verify the
cabinet dimensions and electrical connections.
NOTICE
1. Fully insert the appliance and center it. Do not kink the electrical cable.
1. Screw the appliance into pre-drilled holes in the cabinetry.