14
INSTALLATION
GENERAL CABINET REQUIREMENTS
• 1⁄4" (6 mm) space is required between the side of the appliance and an adjacent wall
or cabinet door when installed at the end of a cabinet run.
• The cabinet base must be flat and capable of supporting the weight (roughly 90 lb,
41 kg) of your appliance when in use.
• The door will overlap the furniture below by approx 3/16" (5 mm) when opened.
• There must be an air gap of at least 1/4" (6 mm) between the appliance and the cabinet
walls when the appliance is installed, i.e. 1/8" (3 mm) each side.
• A gap of at least 1 3/4" (44 mm) is needed between the wall and the back of the unit
for ample space for the power cord.
MWO24
MWO30
Cabinet Requirements
To Next Page
Loading...
