EasyManuals Logo

Zline RG Series User Manual

Zline RG Series
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
7
Range Top Cooking
SURFACE BURNER OPERATION
OFF
OFF
OFF
Maximum Flame Height
Minimum Flame Height
Maximum temperature setting is the recommended control knob position for
burner ignition.
The regulating knobs should be turned in a counter-clockwise direction until reaching
the small flame symbol, vice-versa for the larger flame symbol.
To light the burner, keep pushing the knob and turn it counter-clockwise to maximum,
and hold it for 3 to 5 seconds. The ignition will spark and ignite the burner. At this
position, the gas supply is at the maximum and the flame also at its maximum.
You can reduce the flame size by turning the knob in a counter-clockwise direction.
Should the burner fail to light up, turn the knob to its original position and try again.
Your burner flame should be blue in color.
NOTE: When igniting a burner, all burners will spark, but only the burners knob you are
using will ignite the flame.
NOTE: When first used, the gas burner will not ignite immediately. Time is required for the
gas to fully fill the operating system.
NOTE: System cooling fan will run on all oven settings when it is in use.
The flame color should always be blue� Flickers of orange and yellow are
acceptable� If flames appear orange or yellow and stay that way, check
the surrounding area� Candles, cleaning products, and other changes in
atmosphere can affect the flame color
WARNING
OPERATION

Other manuals for Zline RG Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zline RG Series and is the answer not in the manual?

Zline RG Series Specifications

General IconGeneral
BrandZline
ModelRG Series
CategoryRanges
LanguageEnglish

Related product manuals