Zline RG Series - GAS CONVERSION PROCEDURE; Step 2: Surface Burners

To Next Page

To Previous Page

Step 2: Surface Burners

To replace the nozzles of the surface burners, lift up the burners and unscrew the

nozzles shipped with the range using a 7 mm (socket wrench).

Replace nozzles using the conversion set supplied with the range. Each nozzle has a

number indicating its ﬂow diameter printed on the body. Consult the table on page

15 for matching nozzles to burners.

NG = Natural Gas

LPG = Liquid Propane Gas

NG LPG

9/32

Step1

Step 2

Step 3

Step 4

Step 5

Gas Conversion Procedure

Other manuals for Zline RG Series