17
Step 1: Pressure Regulator
The pressure regulator supplied with the appliance is a convertible type pressure
regulator for use with Natural Gas at a nominal outlet pressure of 4˝ w.c. or LP gas
at a nominal outlet pressure of 11” w.c. and it is pre-assembled from the factory
to operate with one of these gas pressure as indicated in the labels affixed on the
appliance, package and instruction booklet.
To convert the regulator for use with other liquid propane LP gas:
1. Unscrew the upper cap of the regulator, reverse its direction, and screw it in firmly
against the cap.
2. Screw the metal cap, by hand, in the original position on the regulator.
Gas Conversion Procedure
5/8
Reverse regulator
screw and spring.
Gas Conversion Procedure
To Next Page
Loading...
Need help?
General
