7
Installation Requirements
INSTALLATION
ATTACHING THE DROPIN
To prevent liquids from accidentally leaking into the underlying storage space, the
appliance is equipped with a special gasket. To apply this gasket, carefully follow the
instructions in Fig. 1.
1. Lay out the protective sealing strips along the edges of the opening in the bench
top and carefully overlap the strip end. (See Fig. 1).
2. Insert the dropin into the bench top opening. With a screwdriver assemble the
brackets (A) to the hotplate bottom by means of the screws (B)(See Fig. 2).
3. Slide the hooks into position and secure them with the screws.
4. Trim the part of the sealing strips that extend beyond the dropin base.
To Next Page
Loading...
Need help?
General
