18
MONITOR RESOLUTION: Left-click or press “Enter” to set the VGA output resolution,
with the 3 options of 1280*1024, 1024*768 and 800*600;
CAMERA SYSTEM: Left-click or press “Enter” to change over between the two camera
systems of PAL and NTSC;
Volume setup: Move the cursor to “Volume Setup”, left-click or press “Enter” to enter
the Volume Setup screen, and press “Left”, “Right” or drag the cursor with the mouse
directly to adjust the volume.
Note: The system will restart when the VGA resolution or the camera resolution is
modified.
3.7 Advanced
Enter the following screen from “Main Menu” →“Advanced”:
The advanced functions include the 7 options of alarm setup, system information,
motion detection, mobile phone monitoring, system maintenance, PTZ Setup and
Network Setup.
To Next Page
Loading...
