33
First select the date of the record to be played and the channel and record types, and
then click “Search”. The eligible record files will appear in the file list, with the bold
numbers denoting dates with record data, as shown in the figure above. Select the file
to be played back, and double-click this file or click “Playback” to play it. A control bar
will appear at the bottom of the picture for pause, stop, fast forward, slow play and next
frame control. Click “Backup”. This file will be saved in the designated directory directly
(see Figure 4.10 for the saving directory).
4.6 Recording mode
Click “Setup” →“RECORD” to enter the remote recording mode, as shown below:
The setup method is the same as the mainframe menu. See “Recording Mode” in
Chapter 3 for details.
Note: “Detail” can be set in 4-channel DVRs only.
4.7 Alarm setup
Click “Setup” →“Alarm ” to enter the Alarm Setup screen, as shown below:
To Next Page
Loading...
