ZMODO 4CH - 4.8 PTZ Control; 4.9 Network Setup

34
The setup method is the same as the mainframe menu. See “Alarm Setup” in Chapter
3 for details.
4.8 PTZ control
Click “Setup” →“PTZ ” to enter the PTZ Control mode. See Figure 5-6:
See Chapter 3 “Network Setup” in this manual for the setup method.
4.9 Network setup
Click “Setup” →“Network Setup” to enter the Network Setup mode, as shown below:
See Chapter 3 “Network Setup” in this manual for the setup method.