What to do if Zodiac CNX 30 iQ Vacuum Cleaner does not stay firmly on the pool floor?
If your Zodiac Vacuum Cleaner isn't staying firmly on the pool floor, it might be due to a few reasons. First, repeat the immersion steps to remove any air trapped in the appliance's casing. Also, clean the filter if it's full or dirty, and replace it if it remains clogged after cleaning. If the impeller is damaged, no solution is provided.
How to untangle the cable of Zodiac CNX 30 iQ Vacuum Cleaner?
If your Zodiac Vacuum Cleaner cable gets tangled, unroll as much cable as possible into the pool and lay the remainder by the pool side.
What does a red dot mean in the 'My systems' list for Zodiac Vacuum Cleaner?
If you see a red dot in the 'My systems' list for your Zodiac Vacuum Cleaner, it could mean the appliance isn't plugged in or connected to the home Wi-Fi network. If the dot is red when the control box is plugged in and the Bluetooth/Wi-Fi icons are lit, refresh the screen. If the dot turns green, the appliance is ready for use.
How to troubleshoot connection error on Zodiac CNX 30 iQ?
If your Zodiac Vacuum Cleaner displays 'Connection error', check the status of the Bluetooth/Wi-Fi LEDs on the control box and follow the steps described in the table "5.3 I Troubleshooting the connection to the iAquaLink™ app."
What to do if Zodiac CNX 30 iQ update failed?
If your Zodiac Vacuum Cleaner displays 'Update failed or incomplete', disconnect and reconnect the control box to restart the update. If the error persists, contact a retailer.
General| Brand | Zodiac |
|---|---|
| Model | CNX 30 iQ Series |
| Category | Vacuum Cleaner |
| Language | English |
Important safety advice covering general use, handling, and user responsibilities.
Safety precautions related to the electrical components and connection of the appliance.
Warnings for using the cleaner in pools, including liner care and specific conditions.
Overview of the cleaner's components and features.
Detailed technical data, dimensions, and performance parameters of the cleaner.
Explanation of how the robotic cleaner functions and its cleaning mechanism.
Steps required to prepare the pool before using the cleaner.
Instructions for safely placing the cleaner into the pool water.
Connecting the cleaner to its base and the electrical supply safely.
Explanation of the buttons and indicator lights on the control box.
Selecting cleaning modes and initiating the cleaning process.
Procedures for safely lifting the cleaner out of the pool.
Recommended actions after each cleaning operation for maintenance and storage.
Guide for setting up the cleaner with the iAquaLink™ mobile application.
Summary of features and controls available through the iAquaLink™ app.
Operating the cleaner remotely and using the lift system via the app.
Managing errors and adjusting cleaner settings through the app.
How to clean the exterior and main body of the robotic cleaner.
Procedures for cleaning the cleaner's debris filter.
Steps for accessing and cleaning the impeller mechanism.
Guide on how to replace worn-out brushes on the cleaner.
Common problems with the cleaner's movement and cleaning performance.
Interpreting LED signals and app alerts for troubleshooting.
Solutions for problems connecting the cleaner to the Wi-Fi network and app.
To Next Page
