Need help?Do you have a question about the Zodiac ALPHA iQ iAquaLink CONTROL and is the answer not in the manual?
General| Brand | Zodiac |
|---|---|
| Model | ALPHA iQ iAquaLink CONTROL |
| Category | Vacuum Cleaner |
| Language | English |
Lists all items included in the cleaner's package, detailing supplied and optional components.
Describes the various functions and modes available for the cleaner, controlled via the unit and app.
Provides technical data like voltage, power, dimensions, weight, and identifies parts via marking.
Outlines the initial setup procedure for the robotic cleaner and its control unit in relation to the pool.
Details the step-by-step process for assembling the caddy for the robotic pool cleaner.
Explains the autonomous operation of the cleaner and how it collects debris using its filter.
Specifies the required pool water quality and preparation steps before using the cleaner.
Guides the user on how to properly immerse the cleaner into the pool water to ensure correct operation.
Details the safe and correct procedures for connecting the cleaner's control unit to the power supply.
Explains how to initiate, manage, and end a cleaning cycle, including mode selection and time adjustment.
Provides instructions on how to safely remove the cleaner from the pool and store it after a cleaning cycle.
Describes the 'Out of water' mode function used to retrieve the cleaner from the pool edge.
Guides users through the process of downloading and connecting the iAquaLink™ app to the cleaner.
Details how to customize the cleaner's name and initial settings within the iAquaLink™ application.
Explains how to use the iAquaLink™ app for programming, controlling cleaning cycles, and using special functions.
Details how to program and manage cleaning cycles, set schedules, and adjust settings via the iAquaLink™ app.
Describes the 'Lift System' function within the app for easier removal of the cleaner from the pool.
Explains the remote control capabilities of the iAquaLink™ app, including joystick and kinetic modes.
Details how error messages are displayed and managed through the iAquaLink™ app.
Describes how to access and modify various settings for the cleaner via the iAquaLink™ app.
Provides instructions on how to clean the exterior of the robotic pool cleaner using appropriate methods.
Details the procedure for cleaning the cleaner's filter, which is crucial for performance and must be done regularly.
Explains how to safely access and clean the propeller to remove debris and ensure smooth operation.
Guides users on how to identify worn brushes and replace them with new ones to maintain cleaning efficiency.
Details the process for removing worn tyres and fitting new ones onto the cleaner's wheels.
Lists common appliance behaviours and their potential causes and solutions for troubleshooting.
Explains various error codes, blinking LED patterns, and in-app messages with suggested solutions.
Provides solutions for common connection problems between the cleaner and the iAquaLink™ app.
To Next Page
