What to do if Zodiac CNX 40 iQ does not stay firmly on the pool floor?
If your Zodiac Vacuum Cleaner isn't staying firmly on the pool floor, it might be due to a few reasons. First, repeat the immersion steps to remove any air trapped in the appliance's casing. Also, clean the filter if it's full or dirty, and replace it if it remains clogged after cleaning. If the impeller is damaged, no solution is provided.
How to untangle the cable of Zodiac CNX 40 iQ?
If your Zodiac Vacuum Cleaner cable gets tangled, unroll as much cable as possible into the pool and lay the remainder by the pool side.
What does a red dot mean in the 'My systems' list for Zodiac Vacuum Cleaner?
If you see a red dot in the 'My systems' list for your Zodiac Vacuum Cleaner, it could mean the appliance isn't plugged in or connected to the home Wi-Fi network. If the dot is red when the control box is plugged in and the Bluetooth/Wi-Fi icons are lit, refresh the screen. If the dot turns green, the appliance is ready for use.
How to troubleshoot connection error on Zodiac CNX 40 iQ?
If your Zodiac Vacuum Cleaner displays 'Connection error', check the status of the Bluetooth/Wi-Fi LEDs on the control box and follow the steps described in the table "5.3 I Troubleshooting the connection to the iAquaLink™ app."
What to do if Zodiac Vacuum Cleaner update failed?
If your Zodiac Vacuum Cleaner displays 'Update failed or incomplete', disconnect and reconnect the control box to restart the update. If the error persists, contact a retailer.
General| Brand | Zodiac |
|---|---|
| Model | CNX 40 iQ Series |
| Category | Vacuum Cleaner |
| Language | English |
Covers essential safety advice for qualified personnel and general use.
Details safety measures related to the appliance's electrical components.
Advises on water temperature, bathing, and shock chlorination.
Warns about potential damage to pool liners and patterned surfaces.
Details the cleaner's components and accessories with diagrams.
Provides detailed technical data and specifications for different models.
Explains how the robotic cleaner operates autonomously.
Outlines pool requirements, water parameters, and pre-cleaning steps.
Step-by-step guide for safely placing the cleaner into the pool water.
Instructions for connecting the cleaner to its base unit.
Details on safely connecting the control box to the power supply.
Overview of keys and indicator lights on the control box.
Guide on selecting modes and launching the cleaning operation.
Instructions for safely lifting the cleaner out of the pool.
Tips for cleaning the filter, cable, and storing the cleaner.
Steps for downloading, installing, and configuring the iAquaLink app.
Overview of remote control, Lift System, error messages, and settings via app.
Instructions for cleaning the exterior of the appliance.
Steps for cleaning the cleaner's filter after each use.
Guide for accessing and cleaning the impeller.
Instructions on how to replace worn brushes.
Addresses common problems like poor cleaning or movement.
Explains LED indicators and corresponding troubleshooting steps.
Solutions for problems connecting the cleaner to the iAquaLink app.
To Next Page
