To Next PageTo Next PageWhat to do if my Zodiac G4 doesn't move?
If your Zodiac Swimming Pool Vacuum isn't moving, ensure proper flow using Pool Pulse. Also, clean the baskets and filter. Inspect the diaphragm for any damage. Finally, check the hose sections for leaks by lifting each section above the water.
Why won't my Zodiac Swimming Pool Vacuum climb walls?
If your Zodiac Swimming Pool Vacuum won't climb walls, especially in some vinyl pools, use Pool Pulse and increase the flow. Also, confirm the correct hose length and adjust the hose weight.
What to do if Zodiac Swimming Pool Vacuum won't leave the edge?
If your Zodiac Swimming Pool Vacuum won't leave the edge or rim of the pool, use Pool Pulse to reduce the flow. Utilize the return flow to help move the cleaner and adjust the hose weight.
What to do if my Zodiac Swimming Pool Vacuum stops and starts?
If your Zodiac Swimming Pool Vacuum is stopping and starting, examine the diaphragm for any blockages or damage. Use Pool Pulse® to ensure you have the correct flow. Also, inspect the hoses for any leaks.
Why won't my Zodiac Swimming Pool Vacuum climb the walls?
Your Zodiac Swimming Pool Vacuum may not climb the walls of some vinyl-lined pools. Use Pool Pulse® and increase the flow to the high setting #3. Make sure the hose is the correct length. Adjust the hose weight, positioning it further from the cleaner head.
Why isn’t my Zodiac G4 covering the opposite end of the pool?
If your Zodiac Swimming Pool Vacuum isn’t reaching the opposite end of the pool, try adding return diverters or diverting the return inlets downwards. You can also use the flow to help move the cleaner to the opposite end. Check to see if you have enough hose and add more if needed.
Why does my Zodiac Swimming Pool Vacuum keep stopping and starting?
If your Zodiac Swimming Pool Vacuum is stopping and starting, check the diaphragm for any blockages or damage. Use Pool Pulse to determine if the flow is correct.
How to make Zodiac G4 Swimming Pool Vacuum cover the entire pool?
If your Zodiac Swimming Pool Vacuum isn't reaching the opposite end of the pool, try adding return diverters or diverting the return inlets downward. You can also use the flow to help move the cleaner to the opposite end. Move the hose weight slightly away from the cleaner head, and in deeper pools, consider adding additional weight.
Why is my Zodiac G4 Swimming Pool Vacuum making patterns?
If your Zodiac Swimming Pool Vacuum is patterning, add return diverters or divert return inlets downward. Lay the hose in a straight line in the sun to relax its memory. Also, confirm that the hose length is correct, and add one to two hose sections if needed.
How to prevent Zodiac G4 Swimming Pool Vacuum from getting stuck at steps?
If your Zodiac Swimming Pool Vacuum is getting stuck at the steps, utilize the return flow. Confirm that the hose length is correct. Adjust the flow to the cleaner and adjust the hose weight. You can also install a wheel deflector.
General| Type | Robotic |
|---|---|
| Pool Type | In-ground |
| Warranty | 2 years |
| Suitable For | All surface types |
| Cleaning Coverage | Floor and walls |
