What to do if Zodiac Hydroxinator iQ Lighting Equipment displays 'pH dosing STOP'?
If your Zodiac Lighting Equipment displays 'pH dosing STOP', the pH value remains higher than the setpoint despite an injection cycle. Check or replace the container. Check and adjust the alkalinity (TA) of the pool water. Check, clean, or replace the pH sensor.
General| Brand | Zodiac |
|---|---|
| Model | Hydroxinator iQ Series |
| Category | Lighting Equipment |
| Language | English |
Details the items included in the product package and optional modules.
Provides detailed technical data for the chlorinator and pH/ORP modules.
Instructions for correctly positioning and connecting the electrolytic cell.
Steps for installing the temperature sensor and flow switch.
Guidance on mounting the control box in a suitable location.
Details on connecting various components and power supply to the appliance.
Steps for reassembling the control box and protective covers after installation.
Procedures for installing the module and the POD kit measuring chamber.
Connecting the hoses for the pH minus dosing system.
Instructions for filling the filter with glass media.
Guide to measuring and adjusting water parameters like pH, TH, and TA.
Procedure for adding magnesium minerals to the pool water.
Overview of controls and basic setup like language, time, and Wi-Fi.
Setting up pump, timers, chlorination, auxiliary devices, and advanced modes.
Calibrating and configuring pH and ORP sensors for accurate readings.
Utilizing various operation modes like Boost, Low, Cover, and safeguards.
Guide to downloading, installing, and connecting the app to the chlorinator.
Procedures for cleaning the pH and ORP sensors.
How to inspect and clean the chlorinator cell electrodes.
Steps to perform backwashing on the pool filter.
Explains common error messages and their possible causes and solutions.
Interprets Wi-Fi status and addresses connection or performance problems.
To Next Page
