Zodiac MX6 - Introduction

Congratulations on the purchase of your new Zodiac MX6/MX8 automatic pool cleaner. Your Zodiac
MX6/MX8 is designed and manufactured for easy installation, and years of carefree operation. Before
installing the cleaner, please take a few moments to become familiar with its components and to review
the items listed under Important Information.
Like most mechanical devices, the Zodiac MX6/MX8 requires periodic adjustments, routine
maintenance, and the replacement of certain hardworking parts. Be sure to have the Zodiac MX6/MX8
checked occasionally by your local Zodiac dealer or service center.
Always insist on genuine Zodiac
®
replacement parts. Non-Zodiac parts are not made to our specifications.
They may have an adverse effect on the operation of your Zodiac MX6/MX8 or may even damage it.
Zodiac MX6/MX8 Complete Cleaner
1. MX6/MX8 Cleaner Body (1)
2. AD Flow Valve & Connector (1)
3. Universal Weir Cuff (1)
4. Flow Regulator Valve (1)
3
English
5. Twist-Lock Hose Section MX8 (11) MX6 (9)
6. Leader Hose with Float (1)
7. 90 Degree Elbow (1)
8. Yellow Wheel Chip
Introduction
1
5
3
2
6
7
4
8