Need help?Do you have a question about the Zodiac MX 8 and is the answer not in the manual?
General| Weight | 16.5 lbs (7.5 kg) |
|---|---|
| Dimensions | 15.5 x 15.5 x 10.5 inches (39.4 x 39.4 x 26.7 cm) |
| Cleaning Cycle | 2.5 hours |
| Pool Type | In-Ground |
| Pool Surface Compatibility | Concrete, fiberglass, vinyl |
| Pool Surface | All |
Lists and illustrates all parts included in the Baracuda MX 8 cleaner package.
Instructions for preparing the pool before cleaner installation, including cleaning and drain closure.
Guide on connecting hose sections and positioning the hose float for optimal cleaner operation.
Steps for connecting the cleaner hose to a dedicated suction line fitting.
Instructions for connecting the cleaner hose to a pool skimmer, including FlowKeeper valve use.
Guidance on regularly emptying the pump basket for efficient cleaner operation.
Procedure for backwashing the pool filter, including steps before and after cleaner reconnection.
Recommendation to remove the cleaner from the pool before adding chemicals.
Instructions for proper storage and winterizing to prevent damage and maintain performance.
Details on the small debris cleaning mode for smaller particles like sand and silt.
Details on the large debris cleaning mode for larger items such as leaves.
Troubleshooting steps for when the cleaner is not moving or its movement is slow.
Solutions for issues where the cleaner fails to cover the entire pool area.
Guidance on resolving situations where the cleaner repeatedly gets stuck at pool steps.
Steps to take if the cleaner is unable to climb pool walls effectively.
Advice for addressing instances where the cleaner is climbing excessively.
Troubleshooting tips for when the cleaner consistently operates on its side.
To Next Page
