To Next PageTo Next Page
Need help?Do you have a question about the Zodiac RC 4400 and is the answer not in the manual?
General| Type | Robotic |
|---|---|
| Pool Type | In-ground |
| Weight | 9.5 kg |
| Suitable For | Residential Pools |
| Warranty | 2 years |
| Cleaning Cycle | 2.5 hours |
| Pool Size | Up to 12 x 6 m |
| Cleaning Coverage | Floor, Walls, and Waterline |
| Filter Type | Filter Canister |
Provides a visual and textual overview of the pool cleaner's components and models.
Details technical data, dimensions, weight, and safety markings for the cleaner.
Guides the initial setup and placement of the cleaner system for operation.
Details the process of connecting the cleaner to its base or trolley.
Explains the autonomous operation of the pool cleaner.
Outlines necessary pool conditions and preparation steps before use.
Step-by-step guide on how to properly place the cleaner into the pool water.
Crucial instructions for safely connecting the control box to the power supply.
Details on initiating, selecting, and adjusting cleaning cycles for the device.
Procedures for safely stopping the cleaner, removing it from the pool, and storing it.
Instructions for cleaning the cleaner's filter to maintain performance.
Guide on how to clean debris from the cleaner's propeller safely.
Step-by-step instructions for replacing worn brushes on the cleaner.
Procedure for replacing the tracks on specific cleaner models.
Common issues with the cleaner's behavior and their potential causes/solutions.
Explains flashing LED indicators and provides corresponding corrective actions.
