8
❷ Use
2.1 I Immersing the cleaner in the pool
• Roll out the full length of the cable alongside the pool to avoid the cable becoming entangled during immersion (see
image
).
• Posion yourself halfway along the length of the pool before immersing the cleaner (see image
). This will opmise
the cleaner's movements and reduce tangling in the cable.
• Place the cleaner vercally into the water (see image
).
• Move it slightly in all direcons so that the air contained in the cleaner escapes (see gure
).
• It is essenal that the appliance sinks on its own and seles on the pool boom. While it is immersed, the cleaner
draws the length of cable it needs into the pool (see gure
).
Recommended entry point
not recommended
2.2 I Aachment to the base (depending on model)
EN
To Next Page
Loading...
Need help?
General
