11
2.5 I Starng a cleaning cycle
In order to avoid any risk of injury or material damage, please follow the instrucons below:
• Bathing is prohibited when the appliance is in the pool.
• Do not use the appliance during a shock chlorinaon. Wait unl the chlorine level has reached
the recommended value before immersing the cleaner.
• Do not use the appliance if the roller shuer is closed.
• When the control box is powered up, the following symbols light up to indicate:
- The acon in progress
- The cleaning mode selected
- Maintenance required
• The control box switches to standby aer 10 minutes, the screen and the LEDs are switched o. Press any key to exit
standby mode. Standby mode does not stop the appliance if it is in a cleaning cycle.
2.5.1 Cleaning mode selecon (depending on model)
• A cleaning cycle is already congured by default: the symbols are on and the cleaning me appears on the screen, for
example: (depending on the model).
• The cleaning cycle can be selected at any me, before the appliance starts or while it is operang. The new cycle will
be launched instantly and the remaining me countdown will be reinialised.
• The cleaner adapts its movement strategy depending on the choice in order to opmise coverage.
Surface to be cleaned Pool shape Cleaning intensity
Boom only Other shapes, other booms Low intensity
Boom + walls + water line Flat boomed rectangular Intensive
Water line only
• Press
to start the cleaning cycle.
Tip to improve cleaning performance
At the start of the bathing season, launch several cleaning cycles in boom only mode (aer removing the
large debris with a net).
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the lter less clogged.
2.5.2 Adjusng the cleaning me (depending on model)
• You may reduce or increase the me for the cleaning cycle selected or in progress:
- : Reduce by 30 minutes.
- : Increase by 30 minutes.
• Press to conrm.
To Next Page
Loading...
Need help?
General
