3 4
How It Works
AlphaTrak 3 is an easy-to-use veterinary canine and feline blood glucose monitoring system.
Sample Area
Sample area is the dark-colored rectangle on
the test strip
Apply blood or control solution to the
front edge of the sample area only
(not on top of it)
m (Mode) Button
• Turns meter on/o
• Access primary settings
• Access record log
• Scroll backwards
• Silences alarm
c (Configure) Button
• Scrolls forward
• Silences alarm
• Access secondary settings
• Marks a control solution test
Press m and c at the same time after glucose
test or when viewing record log to turn on
Bluetooth
Hold c and press m to change species
code after inserting the test strip and
waiting on sample
System Check Screen
This display always appears when the
meter is turned on. You should check that
the meter matches the example exactly
every time the meter turns on. Do not use
the meter if the display check screen does
not exactly match the example. If the screen
does not match, the meter may show an
incorrect result. Please contact
Customer Care
Display Screen
Displays test results and other
important information
Test Strip Port
Insert the top end of a new AlphaTrak 3 strip
here. The meter powers on when you insert
the test strip
AlphaTrak 3 Test Strip
Insert strip into the meter printed side up
and following the purple arrow
1
1
2
6 7
3
6
7
2
3
4
5
For more information
www.alphatrak.com
4
5
Components
Starter Kit
AlphaTrak 3 Meter
50 AlphaTrak 3 Test Strips
Lancing Device and 30 Lancets
AlphaTrak 3 Control Solution (4 mL)
Carrying Case
Code Strip
Diabetes Diary
Quick User’s Guide
Two Batteries (3V, CR2032)
For more information
www.alphatrak.com
1
6
7
8
9
2
3
4
5
1
2
4
5
3
6
7
8
9
To Next Page
Loading...
Need help?
General
