Zoetis AlphaTRAK User Manual

Distributed by:
Zoetis Inc.
Kalamazoo, MI 49007
ART22860-002 Rev. A 10/16
Press to save your selection.
m
No Sound Low Beep Loud Beep
Time
To set the time:
Press to change the hour and minutes.
Press to save your selections.
Press to accept time format or to change.
c
c
m
m
Hour Minutes
Date
To set the date:
To change the month, press to display the
correct month and to save it. Do the same for
the day and year.
Press to accept date format or to change.
To save all your settings, press and hold down
for three seconds until the meter turns off.
Your meter is now set and ready to use. Follow the
steps on the other side of the Quick User’s Guide to
perform a test.
c
cm
m
m
For additional information, please contact Zoetis Inc.
Customer Service at: 1-888-963-8471
www.AlphaTRAKmeter.com
www.AlphaTRAKmeter.co.uk
www.AlphaTRAKmeter.ca
Accuracy Made Easy
Quick User’s Guide
AlphaTRAK 2 Meter Setup
Before performing a test, set up the volume,
time and date on your meter. With the meter off,
press and hold the button for 3 seconds
until S-E-T appears. Press to bypass the
reminder alarms.
Sound
To set the volume, press
c
m
m
Year Month Day MonthDayYear
ART22860-002_rev-A.pdf 1 11/23/16 10:27 AM

Zoetis AlphaTRAK Specifications

General

Sample Size	0.3 μL
Intended Use	Blood glucose monitoring for dogs and cats
Sample Type	Whole blood
Measurement Range	20-750 mg/dL
Calibration	Species-specific calibration for dogs and cats
Display	LCD
Memory	360 results
Device Type	Blood Glucose Meter
Species Specific	Calibrated specifically for dogs and cats

Summary

AlphaTRAK 2 Meter Setup

Sound Settings

Configure the meter's audio volume for alerts and audible feedback during operation.

Time Setup

Set the current time on the meter for accurate logging of test results.

Date Setup

Set the current date on the meter for accurate record-keeping.

How to Perform a Blood Glucose Test

Test Preparation

Gather supplies, check test strip expiry, and choose a capillary sampling site.

Meter Operation

Set up lancing device, match meter code, insert strip, and obtain blood sample.

View Test Results

Apply blood to the test strip and read the displayed glucose concentration.