ZOJE 20X - Update Pattern Data by USB Disk; Pattern Data Import;Export

Operation and Debugging 20X Bar-tacking and Button Sewing Machine(LCD N)
67
U031
Use keyboard (Clear Key) to stop sewing
machine
0: invalid
1: RESET key
2: External emergency stop
0
U032
Buzzer forbidden
0: no voice
1: panel operation voice
2: panel operation voice and alarm voice
2
U033
Set number of stitches that thread-catching
releases
1～7 stitches
2
U034
Time deferrable in catching thread
－10～0
-5
U035
Forbid the control on catching upper thread
0: Normal
1: Forbidden
1
U036
Select the Feed time.
When stitches are not well tightened, set
the value in “–” direction.
－8～16
-8
U037
Presser foot status at sewing end
0: Back to sewing start and then lift
1: Back to sewing start and at the same time lift
2: lift the presser foot manually by stepping the
pedal
1
U038
When the presser foot doesn’t lift, sewing
can only be done by starting switch
0: Normal
1: Forbidden to lift presser foot
0
U039
Search origin at sewing end
0: Not search origin
1: Search Origin
0
U040
Search origin at cyclic sewing
0: Not Search origin
1: Search origin after the finish of each pattern
2:The whole cycle ends
0
U041
Search origin at sewing of P pattern
0: Not search origin
1: Search Origin
0
U042
Stop position of needle bar
0: upper position
1: highest position
0
U043
Brightness of LED spotlight at the machine
head
0～10
8
The larger
value, the
brighter; 0
means off.
U046
Forbid thread-trimming
0: normal
1: forbid thread-trimming
0
U049
Set winding speed
800～2000
1600
U055
Forbid start bar tacking at button sewing
0: start bar tacking
1: no start bar tacking
0
U063
Setting method of X/Y scale rate
0: by percentage
1: by size
0
U135
Presser foot movement order before sewing
0: stand-by at the sewing start
1: stand-by at the origin
0
U200
Language
Set language
Simplified