Zojirushi NP-NVC18 User Manual

HOW TO SET THE CLOCK / SOUND SIGNALS AND HOW TO CHANGE THEM
HOW TO SET THE CLOCK
The clock is displayed in 24 hours (military time). Although the clock is set before shipment from the factory, certain
conditions such as room temperature may cause it to display an inaccurate time.
If the clock is inaccurate, set the correct time as shown below.
• If the clock is inaccurate, the cooking will not be completed at the time you set for the Timer.
• The clock cannot be changed during Cooking, Reheating, Regular Keep Warm, Extended Keep Warm or Timer Cooking.
e.g.: If the current time is 15:01 but displays 14:56.
Adjusting time
If the time display still does not show the current time, repeat Step 2 to readjust the time.
TIME
SETTING
SOUND SIGNALS AND HOW TO CHANGE THEM
This product is equipped with a Sound Signal function, which will inform you when the Rice Cooker begins cooking, when the
Timer is set, or when cooking has completed. You can choose the Sound Signals from the following:
I Types of Sound Signals: ]
Types of Sound Signals
^' ■ ^^—©and their meanings
Indication
Melody:
The default setting at the time
of shipment from the factory.
Beep:
Choose this setting to
change from a Melody.
Silent:
Choose this setting to
disable the Sound Signal.
Cooking has begun: “Twinkle, Twinkle, Little Star”
a beep
Timer is set:
“Twinkle, Twinkle, Little Star” a beep
Cooking / Reheating has completed: “Amaryllis”
beeps 5 times
no sound
The Outer Lid is not closed during Keep Warm:
four short beeps
no sound
The rice has not been loosened
after cooking completion:
four short beeps
no sound
HOW TO CHANGE THE SOUND SIGNAL: j
<1 Set the Inner Cooking Pan and plug in the
■ Power Cord.
Hold the
button for more than 3 seconds.
O The setting is completed when the desired
^ Sound Signal is heard.
1 WHEN CHANGING THE SOUND SIGNAL: |
• Each time the TIMER button is held for more than 3 seconds, the Sound Signal will change.
You cannot change the Melody Signal of the
initiation of Reheating.
You cannot change the Sound Signal during
Cooking, Keep Warm or Timer Cooking.
If you find it difficult to change/select the
Sound Signal, please start over from Stepf.
@ Melody:
It will play “Amaryllis”
when the sound setting is
completed.
t_
©Beep:
It will beep 3 times when the
sound setting is completed.
©Silent:
It will beep 1 time when the
sound setting is completed.
J
• The selected Sound Signal is stored and will remain even if the Rice Cooker is unplugged.
8

Zojirushi NP-NVC18 Specifications

General

Brand	Zojirushi
Model	NP-NVC18
Category	Rice Cooker
Language	English