EasyManua.ls Logo

Zonar Connect - System Specifications; Physical, Environmental, RFID, and Electrical Details

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Specifications:
Physical
Mounting: Supplied dock and RAM®
mount
Weight: 1.5 pounds
Dimensions: 8.0 x 5.3 x 1.0 inches
8.4 x 5.4 x 2.1 inches with dock
Environmental
Operating Temperature
Docked: -4˚F to 140˚F (-20˚C to 60˚C)
Operating Temperature
Un-Docked: 14˚F to 140˚F (-10˚C to 60˚C)
Storage Temperature: -40˚F to 140˚F (-40˚C to 60˚C)
Charge Temperature: 32˚F to 122˚F (0˚C to 50˚C)
Humidity: 95% R.H., non-condensing
Shock/Vibration: SAE J1455, MIL-STD-202G
EMC/EMI: SAE J1113
ESD: IEC 61000-4-2
IP Rating: 54
RFID
Frequency: 125 kHz
Read Range: 0 to 1 inch
Electrical
Battery: 2760 mAh lithium ion
VOLTAGE
Operating Voltage: 8 VDC to 30 VDC
vehicle battery
Typical current draw
State Draw
Charge disabled <1 mA
Charge enabled, Zonar Connect off -
23 - 300mA
Typical normal Zonar Connect operation
400 - 600 mA Worst case 1.0 A
The Zonar Connect is configured to only charge the
internal battery when the vehicle’s engine is on and
up to 30 minutes after the engine has been turned off.