802.11g Wireless USB Adapter
8
Network Type:
a.
Infrastructure
– A wireless Router and/or Access Point is required.
b.
Ad-hoc
– Peer-to-Peer network, no base station required.
TX Power:
Amount of transmit power used by the radio transceiver to send out signal.
User can choose different value in the drop down menu
Preamble:
Only available under Ad-hoc mode. Value can be chose from Auto, Long, or
Short
Threshold:
Frame size when RTS/CTS handshake performs before attempt to transmit.
a.
RTS Threshold:
Default value = 2347
b.
Fragment Threshold:
Default value = 2346
b.
Authentication and Encryption
Authentication:
Open, Shared, Leap, WPA, WPA-PSK, WPA2 and
WPA2-PSK.
Encryption:
Algorithm used in BSS or IBSS, WEP, TKIP, AES, and None
c. 802.1X
To Next Page
Loading...
Need help?
General
