Indicator Request
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
The Message type indicator is defined as follows:
Bit 1 Bit 0
0 0 SMS Deliver Report – Report is sent from modem to SC
0 1 SMS Submit – Modem is sending SMS message to SC
1 0 SMS Command – SMS command is sent to SC
Reject Duplicates has the following values:
0 Tells the SC to accept a duplicate SMS message
1 Tells the SC to reject a duplicate SMS message
The Validity Period Format defines the format that the validity period parameter uses.
The validity period defines how long the SC considers the SMS message valid before it
discards it. The Validity Period Format is defined as:
Bit 4 Bit 3
0 0 Validity Period not used
1 0 Validity Period uses relative format.
1 1 Validity Period uses absolute format.
The Status Report Request indicates whether or not a status report is requested from
the SC. The format of the Status Report Request is:
27
To Next Page
Loading...
