EasyManuals Logo

Zoom A1 FOUR Quick Guide

Zoom A1 FOUR
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Using the tuner
Use this to tune the connected instrument.
1.
Activate the tuner.
• Press
and at the same
time.
To close the tuner, press or .
2.
Tune the instrument.
• Play the sound that you want to tune
and adjust its pitch.
The nearest note name and pitch detuning
will be shown on the display and by the LEDs.
When the pitch is accurate, the LED at the
center of the meter will light green and the
LEDs to the left and right will light red.
Setting the tuner
• Turn and to set whether the sound is output
while tuning (BYPASS/MUTE) and the standard pitch.
• Press to open the SETTING screen where you
can set the tuner type and drop tunings.
Flat In tune Sharp
1
2
Pitch detuning
Nearest note
Instrument
sound output
Standard
pitch

Other manuals for Zoom A1 FOUR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zoom A1 FOUR and is the answer not in the manual?

Zoom A1 FOUR Specifications

General IconGeneral
Looper30 seconds
Rhythm Patterns68
Weight340 g (without batteries)
Simultaneous Effects5
Sampling Frequency44.1 kHz
A/D Conversion24-bit
D/A Conversion24-bit
DisplayLCD
Patches50
Input1/4'' instrument jack
Output1/4'' stereo output jack
Power4 AA batteries
Frequency Response20 Hz - 20 kHz +1 dB, -3 dB (10 kΩ load)
USBMicro USB

Related product manuals