Zoom AMS Series - Connecting to a Computer; USB Connection and Power; Driver Installation for Windows

2
Connecting to a computer
USB Type-C
( A USB cable that supports data
transmission must be used.)
Computer
(Mac/Windows)
To use USB bus power, set the
BATTERY switch to OFF.
Conrm that the power indicator is lit red.
A dedicated driver is necessary when connecting an AMS-44 to a Windows computer to
make music using a DAW.
Dedicated drivers can be downloaded from product pages on the ZOOM website
(zoomcorp.com). Follow the instructions in the “Product driver installation guide” to
install the ZOOM AMS-44 Driver.