Zoom G5 - Z-Pedal Direction and Parameter Settings

13
Using the Z-Pedal
Z-PEDAL
• TheupanddowndirectioncanbeusedtoturnaneffectON/OFFwiththepedalswitch.
HINT
To choose the pedal direction to be set
• Press to choose the pedal direction.
Up and down Left Right
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3
• Theeffectparametersthatcanbeassignedareshown.
• Turn
to set the minimum value.
• Turn
to set the maximum value.
• The minimumvalue canbe sethigherthan the maximum value.
When set this way, pushing the pedal down decreases the effect,
while letting it up increases the effect.
HINT
• INPUTVOL:Controlstheinputlevel.
• OUTPUTVOL:Controlstheoutputlevel.(Doesnotaffectthevolume
of the rhythm or looper).
• NOASSIGN:Nofunctionisassignedtothecurrentdirection.
HINT
To select the controlled parameter
Set the parameter range that the pedal can adjust.
• Turn .
21 3 21 3 21 3 21 3
NOTE
• See“Effect types and parameters”for detailsabout the functions
that can be assigned for each effect.