Zoom G5 - Completing Firmware Update; Restoring Factory Default Settings

37
Updating the fi rmware
• Whenthe has fi nished updating, “COMPLETE!” appears on its display.
• SetthePOWERswitchtoOFF.
3
To complete updating
• Updatingthefirmwareversionwillnoterasesavedpatches.
HINT
Restoring the to its factory default settings
1. To use the All Initialize function
2. To execute the All Initialize function
• Whilepressing , set the POWER switch to ON.
• TheAllInitializescreenappears.
• Executing theAllInitializefunctionwillrestore allthesettingsofthe , including its patches, to factory
defaults. Do not use this function unless you are certain that you want to do this.
HINT
NOTE
• Pressanykeyotherthan to cancel.
• Press .
VERSION UPDATE