Zoom G5 - Looper Functionality; Activating, Setting Time, and Tempo

28
Using the Looper
21 3 21 3 21 3 21 3
TIME
TEMPO
LOOPER LEVEL
SETTING
RHYTHM LEVEL
Using the Looper
• Turn of Effect 2.
• Turn
of Effect 1.
1
To activate the Looper
2
To set the recording time
• Pressandhold for a second.
NOTE
• The looper can record 1.5–60 seconds (30 seconds when UNDO is enabled).
• If thesettingwould not fallin thisrange, itwillautomatically be
adjusted.
•
Changing the TIME setting will erase the currently recorded loop.
NOTE
• Thesettingrangeis40–250.
• Changingthetempowillerasethecurrentlyrecordedloop.
• Thistemposettingisusedbyeveryeffect,rhythmsandthelooper.
3
To adjust the tempo
• Youcanalsosetthetempousing .
•
If no loop has been recorded yet, you can also set the tempo by tapping .
HINT
Manual
Use the footswitch to start and stop recording.
Note mark
Set the recording time by setting the tempo and the number of
quarter notes.
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3