Zoom G5 - Setting Optional Footswitch Functions; Changing Effect Order

19
Setting patch-specifi c parameters
TOTAL
5
To change the order of the effects
• Turn , and of Effects 2–4 to change effect positions.
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3
• EffectsthatareOFFappeargray.
HINT
4
To set an optional footswitch function
• Press and turn of Effect 1.
• Effectfunctionsthatcanbeassignedareshown.
NOTE
• Inordertousethefunctionset,thecorrespondingeffectmustalsobeON.
• See“Effecttypesandparameters”fordetailsaboutthefunctionsthatcanbeassignedforeacheffect.
• Youcanalsoconnectanexpressionpedal(FP01/FP02)anduseittocontrolthevolume.
• BYPASS/MUTE:Usetobypassormutetheeffect.
• TAPTEMPO:Pressthefootswitchrepeatedlyatthedesiredtempo
to set the tempo used for rhythms, the looper and effects.
• NOASSIGN:Nofunctionisassignedtothefootswitch.
• Iftheselectedparameterhasmultiplefunctions,use
to select
one.
HINT
6
To exit the TOTAL menu
• Press .
21 3 21 3 21 3 21 3