5
By connecting the to a computer, you can use Guitar Lab to manage effects. You
can also use the as an audio interface.
1.
Minimize the .
2.
Use a USB cable to connect
the
USB port to the
computer.
The POWER indicator lights green
when connected properly.
NOTE
If the power supplied by the USB bus is low, or you want to operate the unit with an adapter, use
the ZOOM AD-17 adapter that was designed for use with this unit.
3.
Connect a guitar or bass to the INPUT
jack.
HINT
You can play along with another sound source by connecting an audio device, for example, to
the AUX IN jack.
4.
Connect headphones to the PHONES jack.
5.
Use to adjust the volume to a suit-
able level.
Left side
Computer
Back
Guitar/bass
Right side
4
Left side
5
Connecting to a computer
To Next Page
Loading...
