EasyManuals Logo

Zoom H1essential Firmware Update Guide

Zoom H1essential
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
13.
Slide toward again.
The update will be executed automatically, and the REC indicator will blink slowly.
After about 1 minute, a completion screen will appear.
NOTE
During the firmware update, do not turn the power off or remove the microSD card.
If the update fails, the REC indicator will blink rapidly. If this happens, turn the power off once and confirm that
the microSD card is loaded correctly. Then, turn the power on and try updating again.
14. Turn the power off.
NOTE
If the firmware update failed, starting the unit might not be possible and the REC indicator might stay lit.
Turn the power off and repeat the steps from the beginning.

Other manuals for Zoom H1essential

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zoom H1essential and is the answer not in the manual?

Zoom H1essential Specifications

General IconGeneral
Maximum Sound Pressure Level120 dB SPL
Recording FormatWAV
Bit Depth24-bit
Sampling Rate44.1 kHz, 48 kHz, 96 kHz
Microphone TypeCondenser
Recording MediamicroSD, microSDHC
PowerUSB
Battery LifeApprox. 10 hours
Frequency Response20 Hz - 20 kHz
StoragemicroSD, microSDHC

Related product manuals