EasyManua.ls Logo

Zoom H4n Pro - Operating Instructions Manual

Zoom H4n Pro
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Digital Shot Detection
System (DSDS)
H4n Pro Digital Recorder
TC-410-3500-000
MAN-TC-410-000 (R06)
12001 Cr 1000
Godley, Texas, 76044, USA
Phone: +1 (817) 551-0540
Fax: +1 (817) 551-1674
www.corelab.com/owen
Warning: use of owen equipment contrary to manufacturer’s specications or operating instructions may result in property damage, serious injury or
fatality. If you are not trained in the handling and use of explosive devices, do not attempt to use or assemble any owen perforating systems or owen
ring devices.
This technology is regulated by and, if exported, was exported from the united states in accordance with the export administration regulations (EAR).
Diversion contrary to U.S. Law is prohibited. Export and/or re-export of this technology may require issuance of a license by the bureau of industry and
security (BIS), U.S. Department of Commerce. Consult the BIS, the EAR, and/or Owen Compliance Services, Inc. To determine licensing requirements
for export or re-export of this technology.
This document contains condential information of Owen Oil Tools LP (Owen) and is furnished to the customer for information purposes only. This
document must not be reproduced in any way whatsoever, in part or in whole, or distributed outside the customer organization, without rst obtaining
the express written authorization of owen. This document is the property of owen and returnable upon request of Owen.
©2011, 2018 Owen Oil Tools All rights reserved
MAN-TC-410-000.indd 1 6/11/18 3:25 PM

Other manuals for Zoom H4n Pro

Related product manuals