Zoom MicTrak M3 - Input Settings; Adjusting Stereo Width

Making input settings
Adjusting the stereo width
The stereo width can be adjusted by changing the side mic level.
This setting does not affect the M/S RAW format recording files.
1. Press to adjust the stereo width.
Pressing this cycles through the settings, which are shown by the indicators.
Setting Explanation
OFF This turns off the side mic, enabling use as a mono shotgun mic. This
is good when capturing only a specific sound source is desired.
90º This is good when capturing environmental sound is also desired.
120° This is good when capturing all surrounding sound is desired.
23