Z2I-5294-01
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
zoomcorp.com
Product names, registered trademarks and company names in this document are the property of their respective companies.
Microsoft and Windows are trademarks of the Microsoft group of companies.
iPad, iPhone and Lightning are trademarks of Apple Inc.
USB Type-C is a trademark of the USB Implementers Forum.
All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe
on the copyrights of their respective owners.
The illustrations and display screens in this document could differ from the actual product.
Troubleshooting
The unit will not power on
→
Check the connections.
→
If using batteries, connect a cable to the INPUT
(L/MONO) jack.
→
If the ON/OFF indicator blinks and it will not
start, update the rmware.
There is no sound or output is very quiet
→
Check the connections.
→
Adjust the levels of the effects.
→
Adjust the output volume.
→
Conrm that the tuner output setting is not
“MUTE”.
Sound from the R output jack is strange
→
Check the R OUT POSITION setting.
There is a lot of noise
→
Conrm that nothing is wrong with the instru-
ment cable.
→
Use a genuine AC adapter (ZOOM AD-16).
An effect cannot be selected
→
“MAX EFFECTS. DELETE ONE.” will appear on
the display when trying to add an effect that
would exceed the maximum combination limit.
Delete one effect before adding another one.
To Previous Page
Loading...
