EasyManua.ls Logo

Zoom MRS-4 - User Manual

Zoom MRS-4
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Thank you for purchasing the ZOOM MultiTrak Recording
Studio MRS-4
(subsequently referred to as "the MRS-4").
The MRS-4 offers the following attractive features.
Simultaneous 4-track playback/2-track recording
8 virtual takes per track add up to a total of 32 takes available
for recording.
Flexible track parameter settings
Hi/Lo EQ, effect send, and other parameters can be set
individually for each track.
Bounce feature supports recording from 4 tracks of
simultaneous playback
Even when there are no empty tracks, the MRS-4 allows you
to bounce existing material onto 2 tracks, while performing
simultaneous playback of 4 tracks.
Versatile effects
The MRS-4 incorporates an insert effect for processing the
input signal, a send/return effect for use in a mixer loop, and a
mixdown effect for use on the master bus.
Other sophisticated features
Metronome, MIDI output, AUX input, long-stroke faders, and
other exciting features make the MRS-4 a great all-round
package.
In order to take full advantage of the MRS-4's versatile
functionality and to ensure trouble-free enjoyment, please
read this manual carefully. Keep this manual in a safe
place together with the warranty card.
Operation Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Zoom MRS-4 and is the answer not in the manual?

Summary

Introduction to the ZOOM MRS-4

4-Track Playback;2-Track Recording

Enables simultaneous playback of four tracks and recording on two tracks.

Bounce Feature for 4-Track Playback

Supports recording from 4 tracks of simultaneous playback onto two tracks.

Usage and Safety Precautions

General Safety Warnings and Cautions

Covers power, handling, alterations, and troubleshooting safety advice.

Usage Precautions and Maintenance

Advises on electrical interference, cleaning, and environmental factors.

Understanding the MRS-4 Architecture

SmartMedia Card Requirements

Details the necessity and correct insertion procedure for SmartMedia cards.

MRS-4 Hardware Overview

Top Panel Controls and Indicators

Identifies all buttons, faders, and controls on the top panel.

Rear Panel Connections

Lists all input and output jacks and connectors on the rear panel.

Front Panel Components

Highlights the SmartMedia card slot and other front-facing elements.

Connecting and Powering the MRS-4

External Connections Guide

Details connections for monitors, master recorders, headphones, and MIDI devices.

Power On;Off Procedures

Step-by-step instructions for turning the unit on and off safely.

Basic Recording Setup

Preparing for Recording

Covers initial connections and preparing to record a new song.

Recording Your First Track

Adjusting Input Sensitivity

How to set input levels correctly for recording.

Overdubbing Additional Tracks

Mixdown and Finalizing Your Song

Finalizing Mixdown and Recording

Recording the Final Mix to Master Recorder

Steps to record the mixed output onto an external master recorder.

Advanced Recorder Functions

Combining Tracks with the Bounce Function

Mixing recorded tracks onto other tracks, often called ping-pong recording.

Punch-in;out Recording and Editing

Re-recording Specified Regions (Punch-in;out)

Methods for re-recording specific sections of a track.

Auto Punch-in;out and Locating Functions

Auto Punch-in;out Functionality

Setting and executing automatic punch-in and punch-out recording.

Repeat Playback and Input Mixing

Playing Back Passages Repeatedly (A-B Repeat)

Setting start and end points for repeated playback of song sections.

Track Editing: Copying Data

Copying Specified Data Regions

Copying a selected segment of audio data to another track or location.

Track Editing: Erasing Data

Erasing Specific Data Segments

Removing a specified segment of recorded data from a track.

Song Management Functions

Creating and Selecting Songs

Procedures for creating new songs and reading existing ones.

Metronome and MIDI Synchronization

Synchronizing External MIDI Devices

Connecting and synchronizing external MIDI devices with the MRS-4.

MRS-4 Specifications and File Details

Troubleshooting Common Issues

Resolving Playback Problems

Solutions for issues like no sound, low volume, and fader non-responsiveness.

Troubleshooting Recording Issues

Addresses problems with input signals, track recording, and bounce function.

Summary

Introduction to the ZOOM MRS-4

4-Track Playback;2-Track Recording

Enables simultaneous playback of four tracks and recording on two tracks.

Bounce Feature for 4-Track Playback

Supports recording from 4 tracks of simultaneous playback onto two tracks.

Usage and Safety Precautions

General Safety Warnings and Cautions

Covers power, handling, alterations, and troubleshooting safety advice.

Usage Precautions and Maintenance

Advises on electrical interference, cleaning, and environmental factors.

Understanding the MRS-4 Architecture

SmartMedia Card Requirements

Details the necessity and correct insertion procedure for SmartMedia cards.

MRS-4 Hardware Overview

Top Panel Controls and Indicators

Identifies all buttons, faders, and controls on the top panel.

Rear Panel Connections

Lists all input and output jacks and connectors on the rear panel.

Front Panel Components

Highlights the SmartMedia card slot and other front-facing elements.

Connecting and Powering the MRS-4

External Connections Guide

Details connections for monitors, master recorders, headphones, and MIDI devices.

Power On;Off Procedures

Step-by-step instructions for turning the unit on and off safely.

Basic Recording Setup

Preparing for Recording

Covers initial connections and preparing to record a new song.

Recording Your First Track

Adjusting Input Sensitivity

How to set input levels correctly for recording.

Overdubbing Additional Tracks

Mixdown and Finalizing Your Song

Finalizing Mixdown and Recording

Recording the Final Mix to Master Recorder

Steps to record the mixed output onto an external master recorder.

Advanced Recorder Functions

Combining Tracks with the Bounce Function

Mixing recorded tracks onto other tracks, often called ping-pong recording.

Punch-in;out Recording and Editing

Re-recording Specified Regions (Punch-in;out)

Methods for re-recording specific sections of a track.

Auto Punch-in;out and Locating Functions

Auto Punch-in;out Functionality

Setting and executing automatic punch-in and punch-out recording.

Repeat Playback and Input Mixing

Playing Back Passages Repeatedly (A-B Repeat)

Setting start and end points for repeated playback of song sections.

Track Editing: Copying Data

Copying Specified Data Regions

Copying a selected segment of audio data to another track or location.

Track Editing: Erasing Data

Erasing Specific Data Segments

Removing a specified segment of recorded data from a track.

Song Management Functions

Creating and Selecting Songs

Procedures for creating new songs and reading existing ones.

Metronome and MIDI Synchronization

Synchronizing External MIDI Devices

Connecting and synchronizing external MIDI devices with the MRS-4.

MRS-4 Specifications and File Details

Troubleshooting Common Issues

Resolving Playback Problems

Solutions for issues like no sound, low volume, and fader non-responsiveness.

Troubleshooting Recording Issues

Addresses problems with input signals, track recording, and bounce function.

Zoom MRS-4 Specifications

General IconGeneral
BrandZoom
ModelMRS-4
CategoryRecording Equipment
LanguageEnglish

Related product manuals