Operation States
The 1204 has various operation states. Basically, there are three modes and three functions.
■ Modes
• Manual mode: In this mode, the front-panel controls and switches of the 1204 operate as shown on the unit,
letting you directly select and use effects.
• Memory mode: In this mode, you can choose one of 100 effect settings stored in memory.
The mode also allows editing of effect parameters.
• Recall mode: This mode is used to return the memory settings of the unit to the factory defaults.
■ Functions
• Store: This function serves to store effect settings in memory.
• Effect on/off: This function serves to temporarily turn an effect on and off.
• MIDI channel setting: This function allows selection of MIDI reception channels.
■ 13 ■
To Next Page
Loading...
Need help?
General
