9
:PVDBODPOOFDUUIF to an iPad when using either the optional AD-17 power adapter,
an external DC power supply, or AA batteries.
1. Minimize the volume of any output devices that are currently connected to the
.
2. Set to AUDIO INTERFACE.
3. Install batteries or connect an external power supply. (→ P. 7)
4. Connect the to the iPad using an Apple iPad Camera Connection Kit or
Lightning to USB Camera Adapter.
<Back>
5. Set to BATTERY/DC IN.
After the turns on, it will connect to the iPad.
NOTE
t cannot accept bus power from an iPad.
6. Conrm that the power indicator is lit.
<Left side>
iPad Connection
To Next Page
Loading...
