TC7525-16D 塔式起重机 基础、平衡重及压重 1.2-1
第一篇 塔机的安装
Part I Installation of Tower Crane
Chapter I 概 述 Preface
TC7525-16D 塔式起重机，是中联重科股份有限公司按 JG/T5037-93《塔式
起重机分类》标准设计的新型塔式起重机。
Model TC7525-16D tower crane is designed and manufactured by Zoomlion
heavy industry science and technology co., ltd. according to the Chinese standard of
JG/T5037-93 “Classification of Tower Crane”.
TC7525-16D 塔机为水平起重臂，小车变幅，上回转自升多用途塔机。该机
的特色有：
The TC7525-16D tower crane is a self-climbing multi-purpose machine with a
horizontal jib, a trolleying mechanism and an upper slewing mechanism. Its
characteristics are:
1、性能参数及技术指标国内领先，最大工作幅度 75m，最大起升高度
240.3m。
The performance parameters and technical indicator of the crane are at a leading
level in China. The Maximum working radius is 75m and the maximum hoisting
height is 240.3m.
2、整机外形为国际流行式，非常美观，深受国内外用户的喜爱。
The outline of the crane is international fashion model and very perfect, enjoyed
by the users.
3、工作方式多，适用范围广。该机有基础固定，底架固定，外墙附着及行
走等工作方式，适用各种不同的施工对象。支腿固定独立式及底架固定独立式的
起升高度为 51.3m，附着式是在独立式的基础上，增加加强节和附着装置即可实
现，起升高度可达 240.3m。
该机还有轨道行走式，用户需要请订货时说明。
The crane has many working mode, it is used in different condition. Such as:
outrigger stationary, undercarriage stationary, anchored to the building and mobile, so
that it is applied in different construction projects. The hoisting height of the outrigger
stationary is 51.3m. The hoisting height of the crane anchored to the building reaches
to 240.3m based on the outrigger stationary or the undercarriage stationary, adding
the tower sections and anchored devices…….
To Next Page
Loading...
Need help?
General
