Need help?Do you have a question about the Zoomlion QUY260 and is the answer not in the manual?
The LMI is an aid, not a substitute for operator judgment. It warns of overloading but not other hazards like wind or inclination.
Lists malfunctions, causes, and solutions for common error codes related to radius, angle, OM, and overload relays.
Details errors related to sensor voltage (KMD, angle, backstop pressure) being outside normal limits.
Covers errors for top angle sensors, super lift mast angle, KMD channels, and exceeding voltage limits.
Addresses errors like system force, programming faults, data file mismatches, RAM, and CAN-bus communication issues.
Explains errors for force limits, angle differences, rigging conditions, position anomalies, and A2B switch faults.
Covers errors related to wire length checking, hook height, battery status, and watch dog timeouts.
The LMI is an aid, not a substitute for operator judgment. It warns of overloading but not other hazards like wind or inclination.
Lists malfunctions, causes, and solutions for common error codes related to radius, angle, OM, and overload relays.
Details errors related to sensor voltage (KMD, angle, backstop pressure) being outside normal limits.
Covers errors for top angle sensors, super lift mast angle, KMD channels, and exceeding voltage limits.
Addresses errors like system force, programming faults, data file mismatches, RAM, and CAN-bus communication issues.
Explains errors for force limits, angle differences, rigging conditions, position anomalies, and A2B switch faults.
Covers errors related to wire length checking, hook height, battery status, and watch dog timeouts.
General| Model | QUY260 |
|---|---|
| Max Lifting Capacity | 260 t |
| Travel Speed | 1.2 km/h |
| Gradeability | 30% |
| Crawler Width | 1.2 m |
To Next Page
