DURING RIDE WARNINGS
! The bike's components may become hot after heavy use. Do not touch the motor or brake
components (calliper, disc rotor)as there is a burn risk.
! This EPAC cycle is designed for on-road use only. Do not ride o-road, o jumps, or down
steep bumpy terrain. DO NOT ride the bike over jumps or in skate parks.
! Do not exceed the luggage total loading of 27kg. The total payload of the bike should not
exceed 200kg (rider + cargo)
! It is recommended that the rider always wears a helmet when riding the bike.
! Regularly check the brakes, tyre pressure, steering function and rims and spokes.
! Increase stopping distances in wet weather / ice / snow and avoid heavy braking in these
conditions.
! The bike is tted with lighting and reectors as per the legal requirements in the country of
sale. Always make sure that the lighting and reectors are present.
! As with all mechanical components, pedal assist cycles are subject to wear and high stress
on certain components. These components may react to wear or stress fatigue in dierent
ways. If the design life of a component has been exceeded, it may suddenly fail, possibly
causing injuries to the rider. Any form of crack, scratches or change of colour in highly
stressed areas indicate that the life of the component has been reached and it should be
replaced.
! WARNING: Keep both hands on the grips on the handlebar and the brake levers within reach
while riding, to be able to immediately respond to any circumstance. Failing to do so can
cause you to lose control over the bicycle.
01
To Next Page
Loading...